The invention of stainless steel, since its discovery in 1913, changed the view of utility properties of this metal material as the generations before knew it. Properties of the new material became important also for use in the construction of stainless steel pools area.

More than 40 years experience in the construction of stainless steel swimming pools allowed Berndorf Bäderbau to develop special construction technology. This technology enables flexibly adapt various shapes of pools to ideas of designers and architects.

Final assembly of the pools is realized from pre-manufactured prefabricated components, installation work directly on the spot is minimalized and installation takes place very quickly.

Construction of pools made of stainless steel

Construction of pools made of stainless steel consists of prefabricated parts of the pool walls (including overflow troughs) of length up to 5m. These parts are due to the use of vertical stiffening ribs along the whole depth of the pool wall bending-resistant. The side walls are anchored into reinforced concrete basics.

By the depths pool of more than 2.2 m the mixed construction is recommended in which from the depth of 1.2 m to the bottom of the pool the backing concrete tub is built.

Technology for the construction of new pools

Parts of the side walls are usually anchored into the retaining wall through the reinforced upper layer of concrete.

For small or indoor pools the foundation slab of the building serves for anchoring the pool walls as a plain. In this case the wall parts can be anchored into the reinforced concrete or by stiffening ribs.

The horizontal forces acting on the wall of the pool caused by the weight of water in the a filled state or the pressure of the soil of dusting the pool wall., are boosted through the form of oblique steel struts.

During the construction of new indoor pools are horizontal forces, which acting on the pool walls caused by the weight of water in filled pool, anchored directly to concrete foundation around the pool by fixing elements on the spillway groove.

Technology for pools reconstruction

Installation of stainless steel pool can be in some cases simplified to lining the walls of the original pool. Depending upon the condition of existing pool construction the designer determines the optimal use and possible load. They design the optimal way of the new steel construction inbuilt together with our specialists.

To a carrier substrate of the bottom, which is usually built in the form of a ballast bed with an upper layer of sand is possible to anchore necessary inlet pipes and systems easily. Specially patented system for the inflow of clean water in the form of bottom channels with corresponding inflow openings form the integrated part of the pool bottom.

The bottom of the pool is finally closed by placing the stainless steel bottom plates and then welded. The pool is then closed and creates a hermetic container. Bottom plates are in production equipped with embossed 3D nodules which creates in compliance with European standards safety non-slip surface.

The final operation is a swimming pool attractions inbuild such as stairs, seating benches, loungers, ladders in niches, etc. These are usually welded into the parts of the walls already in production.

A large number of underwater spotlights, massage jets and a different suction and inlet devices are tightly welded in the factory and then subjected to a tightness test. These components can then be assembled directly on the spot.

Online inquiry References


Flow systems

Here is a genuine product of the flow device for fitness swimming. We respond to increasing need of our customers to provide devices with higher power than are actually in the market

Titanium pools

We passed on the first pool made of titanium material, based on increasing requirements of our customers, in April 2016. For example salinity of the water from the Dead Sea would not permit the use of even the highest quality stainless steels. Berndorf Bäderbau is the first manufacturer of titanium pools in the world.

Počet realizací: 835